A purge and trap technique to capture volatile compounds combined with comprehensive two‐dimensional gas chromatography/time‐of‐flight mass spectrometry to investigate the effect of sulfur‐fumigation on Radix Angelicae Dahuricae

Sulfur‐fumigation is known to reduce volatile compounds that are the main active components in herbs used in herbal medicine. We investigated changes in chemical composition between sun‐dried and sulfur‐fumigated Radix Angelicae Dahuricae using a purge and trap technique to capture volatile compounds, and two‐dimensional gas chromatography/time‐of‐flight mass spectrometry for identification. Using sun‐dried Radix Angelicae Dahuricae samples as a reference, the results showed that 73 volatile compounds, including 12 sulfide compounds, were found to be present only in sulfur‐fumigated samples. Furthermore, 32 volatile compounds that were found in sun‐dried Radix Angelicae Dahuricae samples disappeared after sulfur‐fumigation. The proposed method can be applied to accurately discriminate sulfur‐fumigated Radix Angelicae Dahuricae from different commercial sources. Copyright © 2014 John Wiley & Sons, Ltd.     

On pre-exit joint occupation times for spectrally negative Lévy processes

We adopt a new approach to find Laplace transforms of joint occupation times over disjoint intervals for spectrally negative Lévy processes. The Laplace transforms are expressed in terms of scale functions.     

Probing the early stages of thermal fractionation by successive self‐nucleation and annealing performed with fast scanning chip‐calorimetry

The thermal fractionation kinetics of a linear low‐density polyethylene (LLDPE) during Successive Self‐Nucleation and Annealing (SSA) is investigated by fast scanning chip‐calorimetry (FSC), by systematically varying the holding times (t_s) at each fractionation temperature (T_s). The range of explored fractionation times spans four orders of magnitude, from 0.001 to 10 s. Discernible thermal fractions are already detected in the very early stages of the process, at t_s shorter than one second. As t_s increases, the melting endotherm after SSA indicates a progressive lamellar thickening and narrowing of the thicknesses distribution of the various crystalline fractions. The largest variations are observed for the families of crystals containing the longest crystallizable sequences, which also undergo a change of their relative content as a consequence of self‐nucleated crystallization at T_s. The quality of the thermal fractionation obtained in 10 seconds with FSC is equivalent to that of conventional differential scanning calorimetry SSA (t_s = 300 s). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2200–2209     

Long-time simulation of a highly oscillatory Vlasov equation with an exponential integrator

We change a previous time-stepping algorithm for solving a multi-scale Vlasov–Poisson system within a Particle-In-Cell method, in order to perform accurate long-time simulations. As an exponential integrator, the new scheme allows us to use large time steps compared to the size of the oscillations in the solution.     

Chitosan/Ce(IV) redox polymerization‐based amplification for detection of DNA point mutation

Polymerization‐based signal amplification, a technique developed for use in rapid diagnostic tests, hinges on the ability to localize initiators as a function of interfacial binding events. We report here a new DNA detection method in which polymer growth in redox‐polymerization is used as a means to amplify detection signals. The introduction of biotin‐labeled chitosan (biotin‐CS) with highly dense amino groups into the polymerization amplification as macromolecular reducing agent, beneficially simplifies amplification operation, as well as, provides a large amount of initiation points to improve the sensitivity of detection. DNA hybridization, SA and biotin binding reactions led to the attachment of CS on a solid surface where specific DNA sequences were located. With the addition of the mixture containing monomer AM, crosslinker PEGDA and oxidant CAN onto the CS location, the growth of polymer films was triggered to render the corresponding spots readily distinguishable to the naked eye. Direct visualization of 0.21 fmol target DNA molecules of interest was demonstrated. Non‐small cell lung cancer p53 sequence was further selected as a proof‐of‐principle to detect DNA point mutation. The proposed method exhibited an efficient amplification performance for molecule detection, and paved a new way for visual diagnosis of biomolecules. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1929–1937     

Localization and Dynamics of Long‐Lived Excitations in Colloidal Semiconductor Nanocrystals with Dual Quantum Confinement

Semiconductor nanocrystals consisting of a quantum dot (QD) core and a quantum well (QW) shell, where the QD and QW are separated by a tunneling barrier, offer a unique opportunity to engineer the photophysical properties of individual nanostructures. Using the thicknesses of the corresponding layers, the excitons of the first and second excited states can be separated spatially, localizing one state to the QD and the other to the QW. Thus the wave function overlap of the two states can be minimized, suppressing non‐radiative thermalization between the two wells, which in turn leads to radiative relaxation from both states. The molecular analogy to such dual emission would be the inhibition of internal conversion, a special case that violates Kasha′s rule. Using nanosecond time‐resolved spectroscopy of QDQW CdSe/ZnS onion‐like nanocrystals, an intermediate regime of exciton separation and suppressed thermalization is identified where the non‐radiative relaxation of the higher‐energy state is slowed, but not completely inhibited. In this intermediate thermalization regime, the temporal evolution of the delayed emission spectra resulting from trapped carriers mimic the dynamics of such states in nanocrystals that consist of only a QD core. In stark contrast, when a higher‐energy metastable state exists in the QW shell due to strongly suppressed interwell thermalization, the spectral dynamics of the long‐lived excitations in the QD and QW, which are spectrally distinct, are amplified and differ from each other as well as from those in the core‐only nanocrystals. This difference in spectral dynamics demonstrates the utility of exploiting well‐defined exciton localization to study the nature and spatial dependence of the intriguing photophysics of colloidal semiconductor nanocrystals, and illustrates the power of nanosecond gated luminescence spectroscopy in illuminating complex relaxation dynamics which are entirely masked in steady‐state or ultrafast spectroscopy.     

Photophysics of a Ruthenium 4H‐Imidazole Panchromatic Dye in Interaction with Titanium Dioxide

The photophysics of bis(4,4′‐di‐tert‐butyl‐2,2′‐bipyridine‐κ²N,N′)[2‐(4‐carboxyphenyl)‐4,5‐bis(p‐tolylimino‐κN)imidazolato]ruthenium(II) hexafluorophosphate is investigated, both in solution and attached to a nanocrystalline TiO₂ film. The studied substitution pattern of the 4H‐imidazole ligand is observed to block a photoinduced structural reorganization pathway within the 4H‐imidazole ligand that has been previously investigated. Protonation at the 4H‐imidazole ring decreases the excited‐state lifetime in solution. When the unprotonated dye is anchored to TiO₂, photoinduced electron injection occurs from thermally nonrelaxed triplet metal‐to‐ligand charge transfer (³MLCT) states with a characteristic time constant of 0.5 ps and an injection efficiency of roughly 25 %. Electron injection from the subsequently populated thermalized ³MLCT state of the dye does not take place. The energy of this state seems to be lower than the conduction band edge of TiO₂.     

Sol‐to‐Gel Transition in Fast Evaporating Systems Observed by in Situ Time‐Resolved Infrared Spectroscopy

The in situ observation of a sol‐to‐gel transition in fast evaporating systems is a challenging task and the lack of a suitable experimental design, which includes the chemistry and the analytical method, has limited the observations. We synthesise an acidic sol, employing only tetraethylorthosilicate, SiCl₄ as catalyst and deuterated water; the absence of water added to the sol allows us to follow the absorption from the external environment and the evaporation of deuterated water. The time‐resolved data, obtained by attenuated total reflection infrared spectroscopy on an evaporating droplet, enables us to identify four different stages during evaporation. They are linked to specific hydrolysis and condensation rates that affect the uptake of water from external environment. The second stage is characterized by a decrease in hydroxyl content, a fast rise of condensation rate and an almost stationary absorption of water. This stage has been associated with the sol‐to‐gel transition.     

Multi‐constituent determination and fingerprint analysis of Scutellaria indica L. using ultra high performance liquid chromatography coupled with quadrupole time‐of‐flight mass spectrometry

An ultra‐performance liquid chromatography coupled with quadrupole time‐of‐flight mass spectrometry method integrating multi‐constituent determination and fingerprint analysis has been established for quality assessment and control of Scutellaria indica L. The optimized method possesses the advantages of speediness, efficiency, and allows multi‐constituents determination and fingerprint analysis in one chromatographic run within 11 min. 36 compounds were detected, and 23 of them were unequivocally identified or tentatively assigned. The established fingerprint method was applied to the analysis of ten S. indica samples from different geographic locations. The quality assessment was achieved by using principal component analysis. The proposed method is useful and reliable for the characterization of multi‐constituents in a complex chemical system and the overall quality assessment of S. indica.     

Laboratory Performance Evaluation on Analysis of Cadmium and Lead in Herb through Participation in the Regional Laboratory Comparison APMP QM-P10

The ubiquitous presence of heavy metals in the environment arising from various natural and anthropogenic activities have led to the accumulation intrusion of these substances into agricultural products including herbal plants. With the rapid growth of herbal medicine trade market, extensive surveillance monitoring and laboratory testing of heavy metals in herbal samples are carried out worldwide nowadays. Those surveillance activities are very much rely on the quality of the data produced by analytical laboratory. As analysis of heavy metals have been one of several main interests of our laboratory of Research Center for Chemistry, then participation on the international laboratory comparison such as APMP.QM-P10: Cadmium and Lead in Herb is a valuable effort for evaluate laboratory performance in this area of analysis. Several trial run and validation had been performed on the proficiency samples, including sample preparation, level of method blanks, use of matrix modifiers, precision and also trueness check using suitable reference material. Z-scores of 0.787 and 1.105 for cadmium and lead respectively have obtained as result of participation. It was found that the z-scores were satisfactory compared to the satisfactory limit of -2 ≥ z-score ≤ 2. These results provide strong confirmation of maintained capability of Research Center for Chemistry on heavy metals analysis, particulary in herb.